90 Amp DC Inverter Stick Welder with TIG Torch (94200)
By admin
The Schumacher 94200 is an inverter based DC stick welder capable of using most welding electrodes up to 1/8. It is also capable of working with a TIG torch to TIG weld stainless and mild steel.
Price:$1,478.03
February 18th, 2012
Lincoln Electric Invertec V155-S TIG Ready-Pak K2606-1
By admin
The NEW Invertec V155-S offers much more than you would expect from a welder this size. Weighing in at just under 15 lbs. (6.8 kg) the Invertec V155-S is no lightweight contender. It packs the full punch of a heavyweight professional that you can take to the most demanding job sites. With 120/230V auto reconnect operation, the Invertec V155-S can operate from a portable generator. It can also plug into a 200 foot (61 m) 230V extension cord (not included) so you can weld just about anywhere. The tough dent resistant case is IP23 rated for outdoor use.
Backed by a 3-Year Lincoln warranty, this tough reliable welder is packed with innovative unique features like built-in Hot-Start, Auto Adaptive Arc Force, stick soft, stick crisp and Touch Start TIG DC modes.
The unit includes: Invertec V155-S, Stick electrode holder, cable and Twist-Mate plug, Work clamp and cable with Twist-Mate plug, Fully adjustable shoulder strap, 120/230V input cord [6.6 ft. (2 m)] with a 120V 15 Amp plug, Extra
Price:$1,194.00
200AMP DC TIG INVERTER HF ARC STARTING WELDING WELDER
By admin
Rated input voltage (230V)
Current range TIG (10-200Amp)
Rated duty (60 %)
Protection class (IP)21S
Insulation class (H)
electrode 1.6-4 mm
welding thickness 8mm
Input frequency: 50 – 60Hz
Price:
Miller 907308001 Syncrowave 200 Tig Runner Welder
By admin
Miller Electric # 907308001 Syncrowave 200 Runner Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate tungsten spitting and arc rectification.Dual digital meters with alpha-numeric displays allow for quick and easy viewing of actual and preset values of amperage and voltage.Built-in pulse control enhances weld bead and puddle control for improved appearance and quality.Cable management system uses dual cable hangers and foot control storage conveniently attachedto the power source side panels. Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage. 115 V auxiliary power with convenient receptacle on front panelfor cooling system or small tools. Runner has low cylinder rackto eliminate lifting gas cylinders. Syncro Start allows the operator to select Soft, Standard or Hot TIG HF starts to optimize the applicatio
Price:$2,927.00
Eastwood TIG 200 AMP AC/DC Welder
By admin
- Model 12746 High-Frequency, Voltage Sensing TIG Welder with Inverter Technology with 220 Volt NEMA Power Cord
- Foot Pedal Amperage Controller
- Hand Trigger DC Amperage Control
- Torch and 10′ Supply Line
- 10′ Ground Lead and clamp
- Shielding Gas Regulator Assembly with Gauges
- Gas Supply Line
- Instruction Booklet
Eastwood-engineered 200-amp AC/DC TIG Welder brings affordable, pro-quality TIG welding to weekend enthusiasts who work with aluminum, stainless or steel, and want precise welding of thinner-gauge materials up to 1/4″ thick.
- 10-200 amp AC/DC inverter-basedpower supply
- 1/4″ thick welding capacity
- For aluminum, steel, stainless steel and copper; sheet, tube or bar stock
- High-frequency start for prec
Price:
Miller 907135017 Maxstar 150 STLTig Stick Welder Tig/Stick Package With Remote Fingertip Control
By admin
Miller TIG Welder – Maxstar 150 STL DC TIG/Stick Pkg. w/X-CASE & Remote Best of class – Provides maximum portability and performance in the most compact TIG/Stick package in the industry. Dependability and performance all in one machine. Processes Lift Arc DC TIG (GTAW) Stick (SMAW) Applications Light Industrial Applications Maintenance and Repair Steel Erection Mechanical Contractors Dairy Industry Food/Beverage Industry Experimental Aircraft Features: New! Miller’s exclusive multi-voltage plug (MVP(tm)) allows connection to 115 or 230 V receptacles without tools – choose the plug that fits the receptacle and connect it to the power cord. STL: Provides the basic features that are required for most DC TIG or Stick welding applications. Portable in the shop or at the job site – at 13.7 lb the shoulder strap allows the operator to easily move from location to location.
Price:$1,763.00
Miller 907005 Diversion 165, Ac/Dc Tig, 230Vac
By admin
Miller Electric # 907005 Diversion 165 Miller 907005 Diversion 165 AC/DC Tig Welder New NEW! Easy-to-understand operator interface. Only three switches to operate the machine: a power switch, a material selection switch, and an amperage control/material selection switch.Inverter-based, AC/DC power source provides a more consistent welding arc while operating more efficiently (less energy is used).Portable. Whether it’s in the shop, garage or at the race track, at 50 pounds it can be taken anywhere.HF start for non-contact arc starting that elminates tungsten and material contamination. Miller 907005 Diversion 165 AC/DC Tig Welder Fan-On-Demand improves power efficiency and reduces noise and maintenance by lessening the amount of airborne contaminants pulled through the machine. Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage – for adequate shielding every time without waste and no need for adjustment. Fully adjustable am
Price:$1,650.00
WSE200 AC DC TIG MMA PULSE WELDER INVERTER IGBT MOSFT
By admin
Power voltage(V) 230
Rated input current(A) 19
Output current range(A) 10~200
Preheat time(S) 0~2
Delay time(S) 2~10
Attenuated time(S) 0~5
Arc strike time HF
No-load voltage(V): 60
Rated output voltage.(V): 18
Insulation class: F
Efficiency(%) 80
Duty cycle(%) 60
Weight(KG): 22
Machine size(MM) 495x330x390
Price:
Miller 907460 Diversion 180 AC/DC Tig Welder
By admin
Miller 907460 Diversion 180 AC/DC TIG WelderPart # 907460Miller Diversion 180 Features: Easy-to-understand operatorinterface.1. Power-up2. Select material type3. Set material thickness rangethen weld! Its as easy as 1, 2, 3.Inverter-based, AC/DC powersource provides a more consistent welding arc while using less power. Portable. Whether its in the shop, garage or at the race track, at 50 lb they can be taken anywhere.Diversion 180 includes RFCS-RJ45remote foot control and a multi-voltage plug (MVP) which allows connection to 115 or 230 V receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord.HF start for non-contact arc starting that eliminates tungsten and materialcontamination.Fan-On-Demand reduces noiseand maintenance by lessening theamount of airborne contaminantspulled through the machine, whilesufficiently cooling thermallyprotected internal components.Portable. Whether its in the shop,garage or at the race track, at 50 lbthey can be
Price:$2,225.00
Hobart 500551 EZ TIG 165i 230-Volt Inverter-Based AC/DC Welder
By admin
The versatile Hobart EZ TIG 165i welds 22-ga. – 3/16in. steel and is a versatile performer for auto body shop, fabrication, home hobbyist, metal art, vocational training and sign fabrication operations. U.S.A. Volts: 230, Amps: 165, Duty Cycle: 20% at 150 Amps, Amperage Adjustments: Infinite, Range Selection: 10 – 165, Weldable Metals: Mild steel, stainless steel, aluminum, steel/chrome moly, Weld Thickness (in.): 22-ga. to 3/16, Electrode Size (in.): 3/32 collet & collet body with 2% ceriated tungsten, Electrode Cable Length (ft.): 12 1/2, Clamp Cable Length (ft.): 12, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, Power Cord (ft.): 10, Dimensions L x W x H (in.): 17 x 9 7/8 x 23 7/8
Price:$1,650.00
Recent Posts
- Thermal Arc W1003181 Fabricator 181i Multi Process Welder
- Hobart 500553 Handler 210 MVP For Use with SpoolRunner 100
- Hobart 500487 Handler 125 115-Volt 30-to-125 Amp Arc Single-Phase Wire Welding Package
- Clarke 130EN Mig/Fluxcore 110V Welder Gas/No Gas KIT
- Hobart Handler 500554001 190 with SpoolRunner 100
- DuroStar DS4000WGE 4,000 Watt Gas Powered Portable Generator With Electric Start And 210 AMP Electric Welder Combo
- Tooluxe Welding Helmet, Fixed Front with Extra Large View, 4-1/2″ x 5-1/4″ with Adjustable Head Strap, ANSI Z87.1 Approved Lens, MIG/TIG
- Millermatic 180 Auto-Set
- NEW 4 PC SET WELDING MAGNETS WELDER ARC TIG MIG WELDING
- CT520d Lotos 50a Plasma Cutter 200a Tig/stick Arc Welder 110/220vac All-in-one with Stick Aluminum Welding Feature
- SMITH JEWELRY TORCH OUTFIT – “THE LITTLE TORCH” – 23-1001D
- Hobart 500544 Champion Elite 11,000 Watt Generator/225 Amp AC, 210 Amp DC Stick Welder With 23 HP Kohler 4-Cycle Engine
- Tooluxe Pro-Quality 115V 1/8″ Electric Spot Welder
- Northern Industrial Welders Victor-Style Torch Kit with Tote
- Clarke WE6490 Arc 95E Welder