The Hobart 770074 MIG Nozzle Gel prevents adhesion of weld spatter to both the MIG nozzle and weld surface during MIG welding applications. Features: Prevents adhesion of weld spatter What's In The Box: One Container Hobart 770074 MIG Nozzle Gel

Price:

Read More

New Clarke 160EN 220V welder KIT which includes regulator kit, welding cart, welding gloves, and welding helmet

This new in factory box Clarke 160EN mig/fluxcore 220V wire welder KIT is easily converted from fluxcore to gas welding and will weld 1/4 in. steel in a single pass. Electronic wire speed control and 6 variable heat settings allow you to precisely adjust the welder to your needs and is fan cooled for better performance. Operates on 220 volt electrical supply. You will be getting this new in factory box Clarke 160EN welder along with new gas regulator kit, welding cart, welding gloves, welding helmet, roll of wire, chipping hammer/brush, welding mask, and manual as well.

Features:

220V wire welder
Welds with or without gas
Advanced thermal overload protection for transformer
Electronic variable wire feed control
Six power settings for maximum welding heat control
Fan cooled for better performance
Weld up to 1/4″ in a single pass
Welds steel, stainless steel, aluminum

Price:

Read More

This heavy duty MIG welding cart features: 3 Shelves for easy access to supplies, 18″ x 10.5″ top deck, Holds 9 1/2″-Diameter tank, Industrial powder coating resists chips and rust, Built in cylinder rack and storage tray, Heavy duty casters; 2 fixed and two swivel, Cart measures 28″-L x 12″-W x 28″-H,100 lb. weight capacity

Price:$131.99

Read More

The NEW Invertec V155-S offers much more than you would expect from a welder this size. Weighing in at just under 15 lbs. (6.8 kg) the Invertec V155-S is no lightweight contender. It packs the full punch of a heavyweight professional that you can take to the most demanding job sites. With 120/230V auto reconnect operation, the Invertec V155-S can operate from a portable generator. It can also plug into a 200 foot (61 m) 230V extension cord (not included) so you can weld just about anywhere. The tough dent resistant case is IP23 rated for outdoor use.

Backed by a 3-Year Lincoln warranty, this tough reliable welder is packed with innovative unique features like built-in Hot-Start, Auto Adaptive Arc Force, stick soft, stick crisp and Touch Start TIG DC modes.

The unit includes: Invertec V155-S, Stick electrode holder, cable and Twist-Mate plug, Work clamp and cable with Twist-Mate plug, Fully adjustable shoulder strap, 120/230V input cord [6.6 ft. (2 m)] with a 120V 15 Amp plug, Extra

Price:$1,194.00

Read More

This professional Welding Helmet protects users against UV and IR light. The large 2″ X 4 1/4″ lift front viewing area is of shade #11. Two-way adjustable headband ensures a comfortable fit. The helmet meets ANSI Z87.1 standards.

Price:$33.99

Read More

mfr: CLARKE POWER For DIY and home workshops, automotive and industrial welding. The 180EN with solid state electronic heat control can weld mild steel, aluminum, stainless steel and cast iron. Tweco type torch with full on/off safety control, auto thermal safety switch pr events overload. Specs, 180 amps max/30 min, 220 Volt input, single phase, uses 0.023 to 0.035 wire, 2 lb. wire spool, 11 lb. capacity, CSA approved. Rental. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Price:$579.00

Read More

Miller Electric # 907149   Spectrum 125C Plasma CutterFeatures: Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow.Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel.Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.LVC line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.Can be powered by any Miller engine drive with generator power (e.g. Bobcat) or equivalent competitive equipment. See Spec Sheet for kW requirements.35% duty cycle is tested at 40 C (104 F) to give you the cutting power whenever you need it.Starts without high-frequency so it will not interfere with or damage controls or computer.Blow Back Torch DesignT

Price:$1,159.00

Read More

Campbell Hausfeld 115V Stick Welder. A user – friendly welder that out – performs its size! Compact design, BIG performance! Easy to use, with a smooth arc that even novice welders can command with ease. Perfect for work on sheet metal, vehicle trailers, home appliances, and outdoor equipment like lawnmowers. Easy to start, easy to use, easy to carry, and easy to store… the choice for pros and novices alike! More: Works with standard 15 or 20-amp household outlets; Capable of welding mild and stainless steel from 18-ga. to 1/8″; Dual heat settings: preset for 1/16″ or 5/64″ welding rods; Thermal overload shut-off protects welder by shutting down when the duty cycle has been exceeded; Duty cycle: 10% @ 70A; 5-yr. limited manufacturer’s warranty; Weighs only 23 lbs.; Includes hammer / brush, electrode starter pack , and hand shield. A real handyman’s helper! Order yours today! Campbell Hausfeld 115V Stick Welder

Price:$149.99

Read More

Rated input voltage (230V)

Current range TIG (10-200Amp)

Rated duty (60 %)

Protection class (IP)21S

Insulation class (H)

electrode 1.6-4 mm

welding thickness 8mm

Input frequency: 50 – 60Hz

Price:

Read More

Zzz-ap! Buffalo Tools Arc Welders perform quick repairs. 160-amp. PRICED RIGHT! Compact electric miracle workers! These transformer-type Welders are great for making repairs, instant brazing and soldering with a carbon arc torch. Also ideal for maintenance work, auto body and general-purpose welding. For home, garage or the shop. Good news. My special buy zaps the usual price! Features: Operation on 230V, single phase, 60 hz; 80″ power cord; 6′4″ AWG single insulation ground cable and torch cable; Thermal overload protection (10-minute shut-down, 3-minute back on); Full-range, continuous current adjustment, no plugs to change; Includes handled face shield and wire / slag brush; CE certified. Stepless current regulation: 55 amps to 160 amps; Top pull / carry handle; Roll-about wheels; Measures: 9 5/8 x 15 x 15″h., weighs 40 lbs. Get yours today! 160-amp Buffalo Tools Arc Welder

Price:$150.00

Read More