*NEW* Clarke USA 130EN MIG/Fluxcore Wire Welder KIT plus regulator kit, helmet, welding gloves, and welding cart (110V)

This NEW in factory sealed box Clarke 130EN MIG/Fluxcore Wire Feed Welder KIT is easily converted from Fluxcore to Gas welding with the new Clarke gas regulator kit that comes with this and will weld up to 1/4″ inch steel in a single pass! New welder comes with gas regulator kit, welding cart, welding helmet, welding gloves, roll of wire, chipping hammer/brush, and manual as well! Features Tweco-style torch with full On/Off Safetly Control. Electronic wire speed control and 4 variable heat settings allow you to precisely adjust the welder to your needs. Operates on standard 110 volt electrical supply.

120 V Wire Welder

Tweco-style torch with full On/Off Safety control
Advanced safety overload protection for transformer
Electronic variable wire feed control
4 power settings for maximum welding heat control
Welds steel, stainless steel, aluminum, or cast iron

Price:

Read More

Arc Welder 120 volt. This operates for ma standard 120 volt household outlet. Automatic Thermal Overload Protection. Dial style adjustment for Variable 30 to 90 AMP welding range. Welds with 1/16′ or 5/64′ welding rods. Maximum metal thickness is 3/16 mild steel welding.30 to 90 AMP welding range easy to change settings with a variable dialAutomatic Thermal OverLoad ProtectionOperates from a Standard houshold 120 volt outletIncludes Face Mask, Chipping Hammer Brush comboWelding and Grounding leads included

Price:$199.00

Read More

This professional welder is simple to operate. It has a 20 percent duty cycle at 60 amps. Also it’s a 110 input voltage, single phase. The welder has 2 heat settings available. The maximum metal thickness is 1/8″ of mild steel. Made with the quality and durability to last!

Price:$329.99

Read More

*NEW* Clarke USA 190EN MIG/Fluxcore Wire Welder KIT plus regulator kit, helmet, welding gloves, and welding cart (220V)

This NEW in factory sealed box Clarke 190EN MIG/Fluxcore 220V Wire Feed Welder KIT is easily converted from Gas to Fluxcore welding and will easily weld 1/4 in. steel in a single pass. Electronic wire speed control and 6 variable heat settings allow you to precisely adjust the welder to your needs and is fan cooled for better performance. Operates on 220 volt electrical supply. You will be getting this NEW in factory sealed box Clarke 190EN welder along with New gas regulator kit, welding cart, welding helmet, welding gloves, roll of wire, chipping hammer, welding mask, and manual.

Features:

6 power settings for maximum welding control
Easily welds 1/4″ in a single pass
Fan cooled for better performance
Solid state electronic heat control with large PC board for better wire speed control
Weld steel, aluminum, stainless, copper and cast iron, requires correct

Price:

Read More

New Clarke 160EN 220V welder KIT which includes regulator kit, welding cart, welding gloves, and welding helmet

This new in factory box Clarke 160EN mig/fluxcore 220V wire welder KIT is easily converted from fluxcore to gas welding and will weld 1/4 in. steel in a single pass. Electronic wire speed control and 6 variable heat settings allow you to precisely adjust the welder to your needs and is fan cooled for better performance. Operates on 220 volt electrical supply. You will be getting this new in factory box Clarke 160EN welder along with new gas regulator kit, welding cart, welding gloves, welding helmet, roll of wire, chipping hammer/brush, welding mask, and manual as well.

Features:

220V wire welder
Welds with or without gas
Advanced thermal overload protection for transformer
Electronic variable wire feed control
Six power settings for maximum welding heat control
Fan cooled for better performance
Weld up to 1/4″ in a single pass
Welds steel, stainless steel, aluminum

Price:

Read More

mfr: CLARKE POWER For DIY and home workshops, automotive and industrial welding. The 180EN with solid state electronic heat control can weld mild steel, aluminum, stainless steel and cast iron. Tweco type torch with full on/off safety control, auto thermal safety switch pr events overload. Specs, 180 amps max/30 min, 220 Volt input, single phase, uses 0.023 to 0.035 wire, 2 lb. wire spool, 11 lb. capacity, CSA approved. Rental. This item cannot be shipped to APO/FPO addresses. THIS ITEM CANNOT BE RETURNED. Please accept our apologies

Price:$579.00

Read More

The Clarke 110 Volt Arc Welder is the ideal professional welding kit for DIY, home workshops and auto/industrial applications. Easily converts to gas with conversion kit Item# 16472192 (sold separately) for MIG welding. Welds mild steel, aluminum, stainless steel and cast iron. Solid state electronic heat control with larger PC board for better wire speed control. This feature-filled welding kit has a 10-year limited warranty on the transformer and 1-year limited warranty on parts and labor. Volts: 110, Amps: 130, Duty Cycle: 20% @ 130 Amps, Mig Ready: No, requires MIG conversion kit, Wire Feed Speed Control: Yes, Weldable Metals: Steel, stainless steel, and aluminum, Clamp Cable Length (ft.): 5ft. 10in., Regulator and Gas Hose Included: No, Shielding Gas Required: No, Welding Wire Diameter (in.): .023, .030, and .035, Cart: No

Price:$499.00

Read More

The Clarke Hot Shot spool gun welder can weld up to 20 feet away from welder and features a spool gun design that allows precise wire speed control. Volts: 120, Amps: 13, Duty Cycle: 40%, Mig Ready: No, requires regulator, Wire Feed Speed Control: 4 settings, Weldable Metals: Steel, stainless steel, aluminum, cast iron, Weld Thickness (in.): 3/16 steel, Clamp Cable Length (ft.): 12, Regulator and Gas Hose Included: No, Shielding Gas Required: No, Welding Wire Diameter (in.): .030, Power Cord (ft.): 6, Cart: No, Dimensions L x W x H (in.): 19 x 11 x 13

Price:$1,173.34

Read More

Features and Benefits Advanced thermal overload protection for transformer Electronic variable wire feed control Six power settings for maximum welding heat control Easily changed to Mig welding for stainless steel and aluminum Fan cooled for better performance This wire welder welds up to 1/4" in a single pass.  CSA approved Specs: Input: 230 volt – 60 HZ; 22.5A 1PH Output: 120A @ 20VDC-25% MAX O.C.V.=30VDC MAX 150A 22" x 11.6" x 15.4" Weight: 63 lbs.

Price:$549.00

Read More

Arc Welder 120 volt. This operates for ma standard 120 volt household outlet. Automatic Thermal Overload Protection. Dial style adjustment for Variable 30 to 90 AMP welding range. Welds with 1/16′ or 5/64′ welding rods. Maximum metal thickness is 3/16 mild steel welding.30 to 90 AMP welding range easy to change settings with a variable dialAutomatic Thermal OverLoad ProtectionOperates from a Standard houshold 120 volt outletIncludes Face Mask, Chipping Hammer Brush comboWelding and Grounding leads included

Price:$199.00

Read More