Miller Electric # 907405 Millermatic 212 Auto-Set mig welder Welds material from 22 gauge to 3/8 in thick in a single pass.Welding Capability Not to scaleMild SteelAluminum*Min 22 ga (0.9 mm)Min 14 ga (1.9 mm)Max 3/8″ (9.5 mm)Max 3/8″ (9.5 mm) * w/Spoolmate 200 Series Spool GunNew! Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly.Manual Mode allows you to manually set weld parameters for broader applications.NEW! Infinite voltage control replaces “tap” settings which means you can now “dial in” precise weld voltage and wirefeed speed when using the Manual Mode.Compatible with Spoolmate 200 Series spool gun! The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change the spool gun wirefeed speed. (Spoolgun sold seperately).NEW! Line Voltage Compensation keeps welding output constant even if power input varies by +/- 1

Price:$2,134.00

Read More

Miller Electric # 907149   Spectrum 125C Plasma CutterFeatures: Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow.Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel.Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.LVC line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.Can be powered by any Miller engine drive with generator power (e.g. Bobcat) or equivalent competitive equipment. See Spec Sheet for kW requirements.35% duty cycle is tested at 40 C (104 F) to give you the cutting power whenever you need it.Starts without high-frequency so it will not interfere with or damage controls or computer.Blow Back Torch DesignT

Price:$1,159.00

Read More

Miller Electric # 907308001 Syncrowave 200 Runner Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate tungsten spitting and arc rectification.Dual digital meters with alpha-numeric displays allow for quick and easy viewing of actual and preset values of amperage and voltage.Built-in pulse control enhances weld bead and puddle control for improved appearance and quality.Cable management system uses dual cable hangers and foot control storage conveniently attachedto the power source side panels. Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage. 115 V auxiliary power with convenient receptacle on front panelfor cooling system or small tools. Runner has low cylinder rackto eliminate lifting gas cylinders. Syncro Start allows the operator to select Soft, Standard or Hot TIG HF starts to optimize the applicatio

Price:$2,927.00

Read More

Miller TIG Welder – Maxstar 150 STL DC TIG/Stick Pkg. w/X-CASE & Remote Best of class – Provides maximum portability and performance in the most compact TIG/Stick package in the industry. Dependability and performance all in one machine. Processes Lift Arc DC TIG (GTAW) Stick (SMAW) Applications Light Industrial Applications Maintenance and Repair Steel Erection Mechanical Contractors Dairy Industry Food/Beverage Industry Experimental Aircraft Features: New! Miller’s exclusive multi-voltage plug (MVP(tm)) allows connection to 115 or 230 V receptacles without tools – choose the plug that fits the receptacle and connect it to the power cord. STL: Provides the basic features that are required for most DC TIG or Stick welding applications. Portable in the shop or at the job site – at 13.7 lb the shoulder strap allows the operator to easily move from location to location.

Price:$1,763.00

Read More

Miller Electric # 907005 Diversion 165 Miller 907005 Diversion 165 AC/DC Tig Welder New NEW! Easy-to-understand operator interface. Only three switches to operate the machine: a power switch, a material selection switch, and an amperage control/material selection switch.Inverter-based, AC/DC power source provides a more consistent welding arc while operating more efficiently (less energy is used).Portable. Whether it’s in the shop, garage or at the race track, at 50 pounds it can be taken anywhere.HF start for non-contact arc starting that elminates tungsten and material contamination.  Miller 907005 Diversion 165 AC/DC Tig Welder Fan-On-Demand improves power efficiency and reduces noise and maintenance by lessening the amount of airborne contaminants pulled through the machine. Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage – for adequate shielding every time without waste and no need for adjustment. Fully adjustable am

Price:$1,650.00

Read More

Miller 907460 Diversion 180 AC/DC TIG WelderPart # 907460Miller Diversion 180 Features: Easy-to-understand operatorinterface.1. Power-up2. Select material type3. Set material thickness rangethen weld! Its as easy as 1, 2, 3.Inverter-based, AC/DC powersource provides a more consistent welding arc while using less power. Portable. Whether its in the shop, garage or at the race track, at 50 lb they can be taken anywhere.Diversion 180 includes RFCS-RJ45remote foot control and a multi-voltage plug (MVP) which allows connection to 115 or 230 V receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord.HF start for non-contact arc starting that eliminates tungsten and materialcontamination.Fan-On-Demand reduces noiseand maintenance by lessening theamount of airborne contaminantspulled through the machine, whilesufficiently cooling thermallyprotected internal components.Portable. Whether its in the shop,garage or at the race track, at 50 lbthey can be

Price:$2,225.00

Read More